VW Touareg 2011-2014 Rear View Camera fit for:
2011-2014 VolksWagen Touareg RNS850 without factory OEM reverse review camera(Not suitable for RCD 550)
Some Touaregs with RNS850 navigation system does not come with OEM reverse review camera when you buy the car, but you can add this parking interface with tailgate handle reverse view camera. Then you will get the reverse view image on the screen just like an OEM parking radar system. You will only cost US$369 instead of US$1000 for an OEM backup camera.
1. Hightlights of this product
* Totally plug and play, the sets will get power from CAN BUS directly. No need to power the camera via reverse light.
* The camera come with sony ccd chip, support night vision.
* The interface transfer video signal to HU via CAN-BUS, it will not affect the original functions, just like the OEM reverse view camera.
* Display accurate parking guidance lines.
* Automatically display reverse image when you shift the gear.
2. Interface Accessories
3. Sony CCD Camera Special for Touareg
4. Installation Effect
5. Product video
6. Wiring Diagram
||We offer worldwide shipping service by
international couriers like FedEx UPS DHL etc.,
orders usually be shipped within 1-3 working days
and the tracking number will be sent to you by system email.
posted by Ari Comet
Another satisfied customer! Had a local car-audio shop here in Cleveland, Ohio USA install the CarNaviPlayer backup camera retrofit kit. He charged me for 3 hours of labor even though it prob was closer to 3.5 hours of his time. Very professional place -- I know the owner personally, but if anyone is in the nearby area he has done the same/similar kit on Porsche Cayennes before and had no issues whatsoever with this kit. Overall he said there were no big issues, though as noted here the instructions weren't quite as assisting as they could be. Overall I am very pleased with the unit, as it works just as you would expect the factory unit to work. The camera quality seems REALLY good, especially when compared to my wife's Nissan backup camera. Low light is good, not great-- but I think that has more to do with the lack of brightness from the reverse lights on the car. Adequate for sure. But pulling into my well-lit driveway (I usually back my SUV into the garage) this was SO nice!! Very pleased and would definitely recommend!Overall
posted by Stephen Scott
I got the kit in just about 5 days and did the install yesterday. It took me about 4.5 hours. Like the others, the most time consuming thing is fishing some of the cabling. The most time consuming was going through the rubber 6\" cable cover above the rear lid to fish the cable from the camera. It must have taken me at least an hour to do it. The right angle connectors at each end, and the fact that the wires go through an even smaller opening inside the cable than is apparent from just looking at the rubber cover which is about 1\" in diameter. You would think the entire cover would be open for receiving wires, but its not. I had a hard time finding the correct fish wire to use. I wound up using a piece of 12 gauge electrical wire, but 10 gauge would have been better. Fishing the cable from the back to the front was pretty smooth but I did loosen the front pillar airbag cover to run the cable down the last bit to the glove box. I ran the fish cable wire first from the back to the front, then hooked the cable on it and pulled it to the back where it connects to the camera cable. I found that removing the rear lid cover just involved some pulling to get it to release, and wasn\'t as delicate a job as you might think. The connections went fine. I placed the new box behind the head unit connections which are behind the glovebox. They used to be behind the Nav screen on the first model Touareg which I owned, but not anymore, they\'re a separate piece of hardware not physically connected to the Navi screen. Thanks for everyone\'s help and insight. The camera works great!Overall
posted by Pritpal Dhesi
Okay got it installed and running today. Instruction in box are the same as online but only in Chinese so at best just a visual aid. Took about 3.5 hours to do, but most of that time was running wires from rear tailgate to front and locating canbus under steering column (Just behind fuse box and up). It\'s plug and play no coding. One line runs from tailgate to RNS850 behind glovebox. You unplug the grey LVDS cable from the back of the RNS850 and plug it into the Video and Can decoder box and then connect the cable supplied from the decoder back to LVDS port you disconnected in the back of the RNS850. Take the canbus cable supplied from the decoder box and feed it through back of dash to drivers side. Locate canbus, it behind fuse box and up there\'s 3 connectors. take out the lowest one and plug it into the cable from the decoder and then take the end of that cable and plug it back into the canbus. Back at the Decoder take the video lead you ran from the tailgate and plug it into the video line coming from the decoder and also the red wire that is attached to the lead from the camera splice with Blue wire from the decoder. Reassemble and your done! works exactly as stock. Only thing lacking are proper instructions.Overall
posted by Chris Wulff
I ordered the system and it was delivered promptly. Customs did rip it apart which was disappointing but I suppose that they feel entitled to do that. Installation was not difficult using the tips from other reviews of the camera. It is completely plug and play as advertised and works like a dream. I was skeptical but my fears were unfounded. Taping the wire from the camera to a long zip tie made it easier to feed the wire through the rubber hose at the top of the door. I also looked at the system by NavTV but it costs far more, $700 for the camera and the same for the controller. It doesn't have the grid on the screen which I personally wanted. Great system overall, highly recommended.Overall